View C2225C154JBRACAUTO_9010160.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 1 overview kemets automotive grade high voltage surface mount mlccs in x7r dielectric feature a 125c maximum operating temperature and are considered temperature stable. the electronics industries alliance (eia) characterizes x7r dielectric as a class ii material. components of this classifcation are fxed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where q and stability of capacitance characteristics are not critical. x7r exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. capacitance change is limited to 15% from ?55c to +125c. available in a variety of case sizes and industry leading cv values (capacitance/voltage), these devices exhibit low leakage current and low esr at high frequencies. conventional uses include both snubbers and flters in applications such as switching power supplies and lighting ballasts. their exceptional performance at high frequencies has made high voltage mlcc's the preferred dielectric choice of design engineers worldwide. in addition to their use in power supplies, these capacitors are widely used in industries related to automotive (hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. whether under-hood or in-cabin, these capacitors are designed to provide reliable performance in mission and safety critical automotive circuits. stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. kemet automotive grade series capacitors meet the demanding automotive electronics council's aec-q200 qualifcation requirements. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade) ordering information c 1210 c 154 k c r a c auto ceramic case size (l" x w") specifcation/ series capacitance code (pf) capacitance tolerance rated voltage (vdc) dielectric failure rate/ design termination finish 1 packaging/grade (c-spec) 0603 0805 1206 1210 1808 1812 1825 2220 2225 c = standard two signifcant digits and number of zeros. j = 5% k = 10% m = 20% c = 500 b = 630 d = 1,000 f = 1,500 g = 2,000 z = 2,500 h = 3,000 r = x7r a = n/a c = 100% matte sn see "packaging c-spec ordering options table" below 1 additional termination fnish options may be available. contact kemet for details. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 2 packaging c-spec ordering options table packaging type 1 packaging/grade ordering code (c-spec) 3 7" reel auto 13" reel/unmarked auto7411 (eia 0603 and smaller case sizes) auto7210 (eia 0805 and larger case sizes) 7" reel/unmarked/2 mm pitch 2 3190 13" reel/unmarked/2 mm pitch 2 3191 1 reeling tape options (paper or plastic) are dependent on capacitor case size (l" x w") and thickness dimension. see "chip thickness/tape & reel packaging quantities" and "tape & reel packaging information". 2 the 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. this option is limited to eia 0603 (1608 metric) case size devices. for more information regarding 2 mm pitch option see "tape & reel packaging information". 3 all automotive packaging c-specs listed exclude the option to laser mark components. please contact kemet if you require a laser marked option. for more information see "capacitor marking". 3 for additional information regarding "auto" c-spec options, see "automotive c-spec information". benefts aecq200 automotive qualifed 5 5c to 125c operating temperature range ? in dustry-leading cv values ? ex ceptional performance at high frequencies ? le ad (pb)-free, rohs and reach compliant ? ei a 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 case sizes ? dc v oltage ratings of 500 v, 630 v, 1 kv, 1.5 kv, 2 kv, 2.5 kv, and 3 kv ? ca pacitance offerings ranging from 10 pf to 560 nf ? av ailable capacitance tolerances of 5%, 10%, and 20% ? lo w esr and esl ? no n-polar device, minimizing installation concerns u tyviqexxixmrtpexihxivqmrexmsrrmwleppsmrkjsv excellent solderability applications 8tmgepettpmgexmsrwmrgpyhiwmxglqshitsivwyttpmiwmrtyxpxivwviwsrexsvwxerogmvgymxwwryffivgmvgymxwsyxtyx pxivwlmklzspxekigsytpmrkerh('fpsgomrkpmklxmrkfeppewxwzspxekiqypxmtpmivgmvgymxw('('gsrzivxivwerhgsytpmrk getegmxsvwmryogsrzivxivw1evoixwmrgpyhitsivwyttp0'(ysviwgirxfegopmklxfeppewxw,-(pmklxmrkxipigsq equipment, industrial and medical equipment/control, lan/wan interface, analog and digital modems, and automotive (electric and hybrid vehicles, charging stations and lighting applications). application note 6hmipigxvmgmwrsxvigsqqirhihsv'pmripxivmrksvtypwiettpmgexmsrw8liwigetegmxsvwerhsvxliewwiqfpihgmvgymx board containing these capacitors may require a protective surface coating to prevent external surface arcing. surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 3 automotive c-spec information kemet automotive grade products meet or exceed the requirements outlined by the automotive electronics council. details regarding test methods and conditions are referenced in document aecCq200, stress test qualif cation for passive components. these products are supported by a product change notif cation (pcn) and production part approval process warrant (ppap). automotive products offered through our distribution channel have been assigned an inclusive ordering code c-spec, auto. this c-spec was developed in order to better serve small and medium sized companies that prefer an automotive grade component without the requirement to submit a customer source controlled drawing (scd) or specif cation for review by a kemet engineering specialist. this c-spec is therefore not intended for use by kemets oem automotive customers and are not granted the same privileges as other automotive c-specs. customer pcn approval and ppap request levels are limited (see details below). product change notif cation (pcn) the kemet product change notif cation system is used to communicate primarily the following types of changes: ? product/process changes that affect product form, f t, function, and/or reliability ? changes in manufacturing site ? product obsolescence kemet automotive c-spec customer notif cation due to: days prior to implementation process/product change obsolescence* kemet assigned 1 yes (with approval and sign off) yes 180 days minimum auto yes (without approval) yes 90 days minimum 1 /)1)8ewwmkrih'7tigwviuymvixliwyfqmxxepsjegywxsqiv7'(svgywxsqivwtigmgexmsrjsvvizmi*svehhmxmsrepmrjsvqexmsrgsrxegx/)1)8 production part approval process (ppap) the purpose of the production part approval process is: ? to ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. ? to provide the evidence that all customer engineering design record and specif cation requirements are properly understood and fulf lled by the manufacturing organization. ? to demonstrate that the established manufacturing process has the potential to produce the part kemet automotive c-spec ppap (product part approval process) level 1 2 3 4 5 kemet assigned 1 auto 1 11 part number specif c ppap available product family ppap only surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 4 dimensions C millimeters (inches) l b w s t eia size code metric size code l length w width t thickness b bandwidth s separation minimum mounting technique 0603 1608 1.60 (0.063) 0.15 (0.006) 0.80 (0.032) 0.15 (0.006) see table 2 for thickness 0.35 (0.014) 0.15 (0.006) 0.70 (0.028) solder wave or solder refow 0805 2012 2.00 (0.079) 0.20 (0.008) 1.25 (0.049) 0.20 (0.008) 0.50 (0.02) 0.25 (0.010) 0.75 (0.030) 1206 3216 3.20 (0.126) 0.20 (0.008) 1.60 (0.063) 0.20 (0.008) 0.50 (0.02) 0.25 (0.010) n/a 1210 3225 3.20 (0.126) 0.20 (0.008) 2.50 (0.098) 0.20 (0.008) 0.50 (0.02) 0.25 (0.010) solder refow only 1808 4520 4.70 (0.185) 0.50 (0.020) 2.00 (0.079) 0.20 (0.008) 0.60 (0.024) 0.35 (0.014) 1812 4532 4.50 (0.177) 0.30 (0.012) 3.20 (0.126) 0.30 (0.012) 0.60 (0.024) 0.35 (0.014) 1825 4564 4.50 (0.177) 0.30 (0.012) 6.40 (0.252) 0.40 (0.016) 0.60 (0.024) 0.35 (0.014) 2220 5650 5.70 (0.224) 0.40 (0.016) 5.00 (0.197) 0.40 (0.016) 0.60 (0.024) 0.35 (0.014) 2225 5664 5.60 (0.220) 0.40 (0.016) 6.40 (0.248) 0.40 (0.016) 0.60 (0.024) 0.35 (0.014) qualifcation/certifcation automotive grade products meet or exceed the requirements outlined by the automotive electronics council. details regarding test methods and conditions are referenced in document aecCq200, stress test qualifcation for passive components. for additional information regarding the automotive electronics council and aecCq200, please visit their website at www.aecouncil.com. environmental compliance lead (pb)-free, rohs, and reach compliant without exemptions. surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 5 electrical parameters/characteristics item parameters/characteristics operating temperature range ?55c to +125c capacitance change with reference to +25c and 0 vdc applied (tcc) 15% 1 aging rate (maximum % capacitance loss/decade hour) 3.0% 2 dielectric withstanding voltage (dwv) 150% of rated voltage for voltage rating of < 1000v 120% of rated voltage for voltage rating of 1000v (51 seconds and charge/discharge not exceeding 50ma) 3 dissipation factor (df) maximum limit at 25c 2.5% 4 insulation resistance (ir) minimum limit at 25c see insulation resistance limit table (500vdc applied for 1205 seconds at 25c) 1 regarding aging rate: capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours. 2 dwv is the voltage a capacitor can withstand (survive) for a short period of time. it exceeds the nominal and continuous working voltage of the capacitor. 3 capacitance and dissipation factor (df) measured under the following conditions: 1k hz 50hz and 1.0 0.2 vrms if capacitance 10f 12 0hz 10hz and 0.5 0.1 vrms if capacitance >10f 4 to obtain ir limit, divide m-f value by the capacitance and compare to g limit. select the lower of the two limits. note: when measuring capacitance it is important to ensure the set voltage level is held constant. the hp4284 & agilent e4980 have a feature known as automatic level control (alc). the alc feature should be switched to "on". post environmental limits high temperature life, biased humidity, moisture resistance dielectric rated dc voltage capacitance value dissipation factor (maximum %) capacitance shift insulation resistance x7r > 25 all 3.0 20% 10% of initial limit 16/25 5.0 < 16 7.5 insulation resistance limit table (x7r dielectric) eia case size 1,000 megohm 1mgvsevehwsv 100 megohm 1mgvsevehwsv 0603 n/a all 0805 < .0039 f .0039 f 1206 < 0.012 f 0.012 f 1210 < 0.033 f 0.033 f 1808 < 0.018 f 0.018 f 1812 < 0.027 f 0.027 f 1825 < 0.120 uf 0.120 uf 2220 < 0.150 uf 0.150 uf 2225 < 0.180 uf 0.180 uf surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 6 table 1a C capacitance range/selection waterfall (0603 C 1812 case sizes) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). cap cap code case size/ series c0603c c0805c c1206c c1210c c1808c c1812c voltage code c b d c b d c b d f g c b d f g c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes - see table 2 for chip thickness dimensions 10 pf 100 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 11 pf 110 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 12 pf 120 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 13 pf 130 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 15 pf 150 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 16 pf 160 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 18 pf 180 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 20 pf 200 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 22 pf 220 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 24 pf 240 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 27 pf 270 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 30 pf 300 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 33 pf 330 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 3 6 p f 360 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 39 pf 390 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 43 pf 430 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 47 pf 470 j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 51 pf 510 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 56 pf 560 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 62 pf 620 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 68 pf 680 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 75 pf 750 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 82 pf 820 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 91 pf 910 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb gk gk gk gk gk gk gk 100 pf 101 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lc lb gk gk gk gk gk gk gk 1 1 0 pf 111 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lc lb gk gk gk gk gk gk gk 120 pf 121 j k m dg dg dg ef ef ef eg eg fm fm fm fm fm la la la la lb lc lb gk gk gk gk gk gk gk 130 pf 131 j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lb lc lb gk gk gk gk gk gk gk 150 pf 151 j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lb lc lb gk gk gk gk gk gk gk 180 pf 181 j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lc lc lb gk gk gk gk gk gk gk 220 pf 221 j k m dg dg dg ef eg eg eg eg fg fg fg fm fm la la la la lc lc lb gh gh gh gh gh gk gk 270 pf 271 j k m dg dg dg ef eg eg eg eg fg fg fg fk fk la la la lb lc lc lc gh gh gh gh gh gk gk 330 pf 331 j k m dg dg dg ef eg eg eg eg fg fg fg fk fk la la la lb lc lc lc gh gh gh gh gh gk gk 390 pf 391 j k m dg dg dg eg eg eg eg eg fg fg fg fk fs la la la lb lb lb lc gk gk gk gk gk gk gk 470 pf 471 j k m dg dg dg eg eg eg ef eg fg fm fm fs fs la lb lb lc lb lb lc gk gk gk gk gk gk gk 560 pf 561 j k m dg dg dg eg eg eg ef eg fg fm fm fs fl la lb lb lc lb lb lc gh gh gh gk gh gk gk 680 pf 681 j k m dg dg dg eg eg eg ef eg fg fm fm fs fl lb lb lb la lb lc lc gh gh gh gk gh gk gk 820 pf 821 j k m dg dg dg eg ef ef ef eg fg fm fm fl fl lb lb lb la lb lc lc gh gh gh gk gh gk gk 1 , 000 pf 102 j k m cg cg cg dg dg dg eg ef ef ef eg fm fm fm fl fl lb lb lb la lb lc lc gh gh gh gh gh gk gk 1,200 pf 122 j k m cg cg dg dg dg ef ef ef eg eg fm fk fk fl fm lc lc lc lb lc la gh gk gk gh gh gk gk 1,500 pf 152 j k m cg cg dg dg dg ef ef ef eg eg fk fs fs fl fm lc lc lc lb lc lb gk gk gk gh gh gk 1,800 pf 182 j k m cg dg dg dg ef ef ef eg eg fk fs fs fl fm lc lc lc lb lc lc gk gk gk gh gh gk 2,200 pf 222 j k m cg dg dg dg ef ef ef eg eg fk fl fl fl fm lc la la lb lc lc gk gk gk gh gh gk 2,700 pf 272 j k m cg dg dg dg ef ef ef eg fs fl fl fl fm lc la la lb lc gk gh gh gh gk gm 3,300 pf 332 j k m cg dg dg dg ef ef ef eg fs fl fl fl fm la la la lb la gk gh gh gh gk gm 3,900 pf 392 j k m cg dg dg dg ef ef ef eg fl fl fl fl fk la la la lb lb gk gh gh gh gk go 4,700 pf 472 j k m dg dg dg ef ef ef eg fl fl fl fl fk la la la lb lc gh gh gh gh gh go 5,600 pf 562 j k m dg dg ef ef ef ef fl fl fl fm fk la lb lb lc gh gh gh gk gk 6,800 pf 682 j k m dg dg eg eg eg ef fl fl fl fm fs la lb lb lc gh gh gh gk gm 8,200 pf 822 j k m dg dg eg eg eg ef fl fl fl fk la lb lb lc gh gh gh gk gm 10,000 pf 103 j k m dg dg eg eg eg eg fl fl fl fk la lb lb lc gh gh gh gk go 12,000 pf 123 j k m dg dg eg ej ej fl fl fl fk la lc lc lb gh gk gk gk cap cap code rated voltage (vdc) 500 630 1000 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d c b d f g c b d f g c b d f g z h c b d f g z h case size/ series c0603c c0805c c1206c c1210c c1808c c1812c surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 7 capacitance cap code case size/ series c1825c c2220c c2225c voltage code c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes C see table 2 for chip thickness dimensions 100 pf 101 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 110 pf 111 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 120 pf 121 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 130 pf 131 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 150 pf 151 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 180 pf 181 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 220 pf 221 j k m he he he he he he hg jk jk jk jk jk jk jk kf kf kf kf kf kf kf 270 pf 271 j k m he he he he he he hg jk jk jk jk jk jk jk ke ke ke ke ke ke kf 330 pf 331 j k m je je je je je jk jk ke ke ke ke ke ke kf 390 pf 391 j k m je je je je je jk jk ke ke ke ke ke ke kf 470 pf 471 j k m hg hg hg hg hg hg hg je je je je je jk jk kf kf kf kf ke ke kf 560 pf 561 j k m hg hg hg hg hg hg hg jk jk jk jk jk jk jk kf kf kf kf ke ke kf 680 pf 681 j k m hg hg hg hg hg hg hg je je je jk jk jk jk kf kf kf kf ke kf kf 820 pf 821 j k m hg hg hg hg hg hg hg je je je jk jk jk jk ke ke ke kf ke kf kf capacitance cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h case size/ series c1825c c2220c c2225c table 1a C capacitance range/selection waterfall (0603 C 1812 case sizes) cont'd table 1b C capacitance range/selection waterfall (1825C2225 case sizes) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). cap cap code case size/ series c0603c c0805c c1206c c1210c c1808c c1812c voltage code c b d c b d c b d f g c b d f g c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes - see table 2 for chip thickness dimensions 15,000 pf 153 j k m dg eg ej ej fl fl fl fl la lc lc lc gh gk gk gh 18,000 pf 183 j k m dg ej ej ej fl fl fl fm la le le gh gk gk gm 22,000 pf 223 j k m dg ej ej ej fl fm fm fm la le le gh gk gk gm 27,000 pf 273 j k m ej ej fm fk fk fk la la la gh gb gb go 33,000 pf 333 j k m ej ej fm fg fh fs lc la la gh gb gb go 39,000 pf 393 j k m ej fk fg fh fs lc la la gh gb gb 47,000 pf 473 j k m ej fk fh fk lc la lb gh gb gc 56,000 pf 563 j k m ej fg fh fk lc la lb gh gb ge 62,000 pf 623 j k m ej fg fk fs la la lc gk gb ge 68,000 pf 683 j k m ej fg fk fs la la lc ge ge ge 82,000 pf 823 j k m fh fk la lc gb ge gk 0.10 f 104 j k m fk fs la lc gb gh gj 0.12 f 124 j k m fk la ge gk 0.15 f 154 j k m fk lb ge gn 0.18 f 184 j k m gf 0.22 f 224 j k m gj 0.27 f 274 j k m gl 0.33 f 334 j k m gs cap cap code rated voltage (vdc) 500 630 1000 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d c b d f g c b d f g c b d f g z h c b d f g z h case size/ series c0603c c0805c c1206c c1210c c1808c c1812c surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 8 table 1b C capacitance range/selection waterfall (1825 C 2225 case sizes) cont'd kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). capacitance cap code case size/ series c1825c c2220c c2225c voltage code c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes C see table 2 for chip thickness dimensions 1,000 pf 102 j k m hg hg hg hg hg hg hg je jk jk jk jk jk jk ke ke ke kf ke kf kf 1,200 pf 122 j k m hg hg hg hg hg hg hg je jk jk jk jk jk jk ke ke ke kf kf kf kf 1,500 pf 152 j k m hg hg hg hg hg hg hg je jk jk jk jk jk jk ke ke ke kf kf kf kf 1,800 pf 182 j k m he he he he he hg hg je jk jk jk jk jk jk ke ke ke kf kf kf kf 2,200 pf 222 j k m he he he he he hg hg je jk jk je je jk jk kf ke ke kf kf kf kf 2,700 pf 272 j k m he he he he he hg jk jk jk je je jk jk ke ke ke ke ke kf ke 3,300 pf 332 j k m he he he he he hg jk jk jk je je jk je ke ke ke ke ke kf ke 3,900 pf 392 j k m he he he he he hg jk jk jk je je jk je ke kf kf ke ke kf ke 4,700 pf 472 j k m he he he he he hg jk jk jk je jk je je ke kf kf ke ke kf ke 5,600 pf 562 j k m he he he he he hg jk jk jk je jk je je ke kf kf ke ke kf ke 6,800 pf 682 j k m he he he he he hj jk je je je jk je je ke kf kf ke kf ke ke 8,200 pf 822 j k m he he he he he hj jk je je je jk jk jk kf ke ke ke kf kf kf 10,000 pf 103 j k m he he he he hj hk je je je je jl jl jl kf ke ke ke kf kh kh 12,000 pf 123 j k m he he he hg hj je jk jk jk jl jl jl ke ke ke ke kf kh kh 15,000 pf 153 j k m he he he hg hk je jk jk jk jl jn jn ke ke ke ke kf kj kj 18,000 pf 183 j k m he he he hg je jk jk jk jn ke ke ke ke kh 22,000 pf 223 j k m he hg hg hg je jk jk jk jn ke kf kf kf kj 2 7 ,000 pf 273 j k m he hg hg hg je jk jk jk ke kf kf kf kj 33,000 pf 333 j k m he hg hg he je jk jk jk ke kf kf kf 39,000 pf 393 j k m he hg hg hg je jk jk je ke kf kf kf 47,000 pf 473 j k m he hg hg hj je jk jk jk ke kf kf kf 56,000 pf 563 j k m he hg hg hj je je je jl ke kf kf kf 62,000 pf 623 j k m hg hg hg hk je je je jl ke kf kf kh 68,000 pf 683 j k m hg hj hj hk je jk jk jl ke kf kf kj 82,000 pf 823 j k m hg hj hj je jl jl jn ke kf kf kj 0.10 f 104 j k m hg hk hk je jn jn ke kh kh kj 0.12 f 124 j k m hg he je jn jn ke kh kh 0.15 f 154 j k m hg he jk je kf kj kj 0.18 f 184 j k m hg hg jk je kf ke 0.22 f 224 j k m hg hj jk jk kf kf 0.27 f 274 j k m hj hj jk jl kf kh 0.33 f 334 j k m hj jl jn kf kh 0.39 f 394 j k m hk jn kh kj 0.47 f 474 j k m jn kh kj 0.56 f 564 j k m kj capacitance cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h case size/ series c1825c c2220c c2225c surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 9 table 2 C chip thickness/tape & reel packaging quantities thickness code case size 1 thickness range (mm) paper quantity 1 plastic quantity 7" reel 13" reel 7" reel 13" reel cg 0603 0.80 0.10 4,000 15,000 0 0 dg 0805 1.25 0.15 0 0 2,500 10,000 ef 1206 1.20 0.15 0 0 2,500 10,000 eg 1206 1.60 0.15 0 0 2,000 8,000 ej 1206 1.70 0.20 0 0 2,000 8,000 fg 1210 1.25 0.15 0 0 2,500 10,000 fl 1210 1.40 0.15 0 0 2,000 8,000 fh 1210 1.55 0.15 0 0 2,000 8,000 fm 1210 1.70 0.20 0 0 2,000 8,000 fk 1210 2.10 0.20 0 0 2,000 8,000 fs 1210 2.50 0.30 0 0 1,000 4,000 le 1808 1.00 0.10 0 0 2,500 10,000 la 1808 1.40 0.15 0 0 1,000 4,000 lb 1808 1.60 0.15 0 0 1,000 4,000 lc 1808 2.00 0.15 0 0 1,000 4,000 gb 1812 1.00 0.10 0 0 1,000 4,000 gc 1812 1.10 0.10 0 0 1,000 4,000 ge 1812 1.30 0.10 0 0 1,000 4,000 gh 1812 1.40 0.15 0 0 1,000 4,000 gf 1812 1.50 0.10 0 0 1,000 4,000 gk 1812 1.60 0.20 0 0 1,000 4,000 gj 1812 1.70 0.15 0 0 1,000 4,000 gn 1812 1.70 0.20 0 0 1,000 4,000 gl 1812 1.90 0.20 0 0 500 2,000 gm 1812 2.00 0.20 0 0 500 2,000 gs 1812 2.10 0.20 0 0 500 2,000 go 1812 2.50 0.20 0 0 500 2,000 he 1825 1.40 0.15 0 0 1,000 4,000 hg 1825 1.60 0.20 0 0 1,000 4,000 hj 1825 2.00 0.20 0 0 500 2,000 hk 1825 2.50 0.20 0 0 500 2,000 je 2220 1.40 0.15 0 0 1,000 4,000 jk 2220 1.60 0.20 0 0 1,000 4,000 jl 2220 2.00 0.20 0 0 500 2,000 jn 2220 2.50 0.20 0 0 500 2,000 ke 2225 1.40 0.15 0 0 1,000 4,000 kf 2225 1.60 0.20 0 0 1,000 4,000 kh 2225 2.00 0.20 0 0 500 2,000 kj 2225 2.50 0.20 0 0 500 2,000 thickness code case size 1 thickness range (mm) 7" reel 13" reel 7" reel 13" reel paper quantity 1 plastic quantity package quantity based on fnished chip thickness specifcations. 1 if ordering using the 2 mm tape and reel pitch option, the packaging quantity outlined in the table above will be doubled. this option is limited to eia 0603 (1608 metric) case size devices. for more information regarding 2 mm pitch option see "tape & reel packaging information". surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 10 table 3 C chip capacitor land pattern design recommendations per ipcC7351 eia size code metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) c y x v1 v2 c y x v1 v2 c y x v1 v2 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 1.50 1.35 2.80 1.70 1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00 1210 3225 1.60 1.35 2.80 5.65 3.80 1.50 1.15 2.70 4.70 3.20 1.40 0.95 2.60 4.00 2.90 1808 4520 2.30 1.75 2.30 7.4 0 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40 1812 4532 2.15 1.60 3.60 6.90 4.60 2.05 1.40 3.50 6.00 4.00 1.95 1.20 3.40 5.30 3.70 1825 4564 2.15 1.60 6.90 6.90 7.90 2.05 1.40 6.80 6.00 7.30 1.95 1.20 6.70 5.30 7.00 2220 5650 2.75 1.70 5.50 8.20 6.50 2.65 1.50 5.40 7.30 5.90 2.55 1.30 5.30 6.60 5.60 2225 5664 2.70 1.70 6.90 8.10 7.90 2.60 1.50 6.80 7.20 7.30 2.50 1.30 6.70 6.50 7.00 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. kemet only recommends wave soldering of eia 0603, 0805 and 1206 case sizes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). image below based on density level b for an eia 1210 case size. y c c x x v1 v2 grid placement courtyard y surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 11 soldering process recommended soldering technique: ? so lder wave or solder refow for eia case sizes 0603, 0805 and 1206 ? al l other eia case sizes are limited to solder refow only recommended refow soldering profle: kemets families of surface mount multilayer ceramic capacitors (smd mlccs) are compatible with wave (single or dual), convection, ir or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemets recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/j- std-020 standard for moisture sensitivity testing. these devices can safely withstand a maximum of three refow passes at these conditions. storage and handling ceramic chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureCreels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 70% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. profle feature termination finish snpb 100% matte sn preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/second maximum 3c/second maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 235c 260c time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/second maximum 6c/second maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum 2sxippxiqtivexyviwviivxsxligirxivsxlitegoekiqiewyvihsrxli getegmxsvfshwyvegixlexmwegmrkythyvmrkewwiqfpvis time te mp erature t smin 25 t smax t l t p maximum ramp up rate = 3oc/sec maximum ramp down rate = 6oc/sec t p t l t s 25oc to peak surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 12 construction dielectric material (batio 3 ) detailed cross section barrier layer (ni) inner electrodes (ni) barrier layer (ni) inner electrodes (ni) dielectric material (batio 3 ) termination finish (100% matte sn) termination finish (100% matte sn) end termination/ external electrode (cu) end termination/ external electrode (cu) surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 13 capacitor marking (optional): these surface mount multilayer ceramic capacitors are normally supplied unmarked. if required, they can be marked as an extra cost option. marking is available on most kemet devices but must be requested using the correct ordering code identif er(s). if this option is requested, two sides of the ceramic body will be laser marked with a k to identify kemet, followed by two characters (per eiaC198 - see table below) to identify the capacitance value. eia 0603 case size devices are limited to the k character only. laser marking option is not available on: ? c0g, ultra stable x8r and y5v dielectric devices ? eia 0402 case size devices ? eia 0603 case size devices with flexible termination option. ? kps commercial and automotive grade stacked devices. ? x7r dielectric products in capacitance values outlined below marking appears in legible contrast. illustrated below is an example of an mlcc with laser marking of ka8, which designates a kemet device with rated capacitance of 100 f. orientation of marking is vendor optional. eia case size metric size code capacitance 0603 1608 170 pf 0805 2012 150 pf 1206 3216 910 pf 1210 3225 2,000 pf 1808 4520 3,900 pf 1812 4532 6,700 pf 1825 4564 0.018 f 2220 5650 0.027 f 2225 5664 0.033 f kemet id 2-digit capacitance code surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 14 capacitor marking (optional) contd capacitance (pf) for various alpha/numeral identif ers 9 0 1 2 3 4 5 6 7 8 capacitance (pf) a 0.1 1 0 10 100 1,000 10,000 100,000 1,000,000 10,000,000 100,000,000 b 0.11 1.1 11 110 1,100 11,000 110,000 1,100,000 11,000,000 110,000,000 c 0.12 1 2 12 120 1,200 12,000 120,000 1,200,000 12,000,000 120,000,000 d 0.13 1 3 13 130 1,300 13,000 130,000 1,300,000 13,000,000 130,000,000 e 0.15 1 5 15 150 1,500 15,000 150,000 1,500,000 15,000,000 150,000,000 f 0.16 1 6 16 160 1,600 16,000 160,000 1,600,000 16,000,000 160,000,000 g 0.18 1 8 18 180 1,800 18,000 180,000 1,800,000 18,000,000 180,000,000 h 0.2 2 0 20 200 2,000 20,000 200,000 2,000,000 20,000,000 200,000,000 j 0.22 2 2 22 220 2,200 22,000 220,000 2,200,000 22,000,000 220,000,000 k 0.24 2.4 24 240 2,400 24,000 240,000 2,400,000 24,000,000 240,000,000 l 0.27 2.7 27 270 2,700 27,000 270,000 2,700,000 27,000,000 270,000,000 m 0.3 3 0 30 300 3,000 30,000 300,000 3,000,000 30,000,000 300,000,000 n 0.33 3 3 33 330 3,300 33,000 330,000 3,300,000 33,000,000 330,000,000 p 0.36 3 6 36 360 3,600 36,000 360,000 3,600,000 36,000,000 360,000,000 q 0.39 3 9 39 390 3,900 39,000 390,000 3,900,000 39,000,000 390,000,000 r 0.43 4 3 43 430 4,300 43,000 430,000 4,300,000 43,000,000 430,000,000 s 0.47 4.7 47 470 4,700 47,000 470,000 4,700,000 47,000,000 470,000,000 t 0.51 5.1 51 510 5,100 51,000 510,000 5,100,000 51,000,000 510,000,000 u 0.56 5 6 56 560 5,600 56,000 560,000 5,600,000 56,000,000 560,000,000 v 0.62 6 2 62 620 6,200 62,000 620,000 6,200,000 62,000,000 620,000,000 w 0.68 6 8 68 680 6,800 68,000 680,000 6,800,000 68,000,000 680,000,000 x 0.75 7 5 75 750 7,500 75,000 750,000 7,500,000 75,000,000 750,000,000 y 0.82 8 2 82 820 8,200 82,000 820,000 8,200,000 82,000,000 820,000,000 z 0.91 9.1 91 910 9,100 91,000 910,000 9,100,000 91,000,000 910,000,000 a 0.25 2 5 25 250 2,500 25,000 250,000 2,500,000 25,000,000 250,000,000 b 0.35 3 5 35 350 3,500 35,000 350,000 3,500,000 35,000,000 350,000,000 d 0.4 4 0 40 400 4,000 40,000 400,000 4,000,000 40,000,000 400,000,000 e 0.45 4 5 45 450 4,500 45,000 450,000 4,500,000 45,000,000 450,000,000 f 0.5 5 0 50 500 5,000 50,000 500,000 5,000,000 50,000,000 500,000,000 m 0.6 6 0 60 600 6,000 60,000 600,000 6,000,000 60,000,000 600,000,000 n 0.7 7 0 70 700 7,000 70,000 700,000 7,000,000 70,000,000 700,000,000 t 0.8 8 0 80 800 8,000 80,000 800,000 8,000,000 80,000,000 800,000,000 y 0.9 9 0 90 900 9,000 90,000 900,000 9,000,000 90,000,000 900,000,000 surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 15 tape & reel packaging information kemet offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with eia standard 481. this packaging system is compatible with all tape-fed automatic pick and place systems. see table 2 for details on reeling quantities for commercial chips. 8 mm, 12 mm or 16 mm carrier tape 178 mm (7.00") or 330 mm (13.00") anti-static reel embossed plastic* or punched paper carrier. embossment or punched cavity anti-static cover tape (.10 mm (.004") maximum thickness) chip and kps orientation in pocket (except 1825 commercial, and 1825 and 2225 militar y) *eia 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. kemet ? bar code label sprocket holes table 5 C carrier tape conf guration, embossed plastic & punched paper (mm) eia case size tape size (w)* embossed plastic punched paper 7" reel 13" reel 7" reel 13" reel pitch (p 1 )* pitch (p 1 )* 01005 C 0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206 C 1210 8 4 4 4 4 1805 C 1808 12 4 4 1812 12 8 8 kps 1210 12 8 8 kps 1812 & 2220 16 12 12 array 0508 & 0612 8 4 4 6ijivxs*mkyviwjsverh4 1 gevvmivxetivijivirgipsgexmsrw 6ijivxs8efpiwjsvxspivergiwtigmgexmsrw new 2 mm pitch reel options* packaging ordering code (c-spec) packaging type/options c-3190 automotive grade 7" reel unmarked c-3191 automotive grade 13" reel unmarked c-7081 commercial grade 7" reel unmarked c-7082 commercial grade 13" reel unmarked qqtmxglviipsrpezempefpijsv)-%gewiwmi qqtmxglviipjsv)-%gewiwmiyrhivhizipstqirx benef ts of changing from 4 mm to 2 mm pitching spacing ? lower placement costs ? double the parts on each reel results in fewer reel changes and increased eff ciency ? fewer reels result in lower packaging, shipping and storage costs, reducing waste surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 16 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre eling cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] table 6 ? embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/- 0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 ,b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.05 (0.138 0.002) 12.0 0.10 (0.157 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape with or without components shall pass around r without damage (see figure 6). 3. if s < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481 paragraph 4.3 section b). 4. b dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 4). (e) for kps series product, a 0 and b 0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in eia standard 481 for standards relating to more precise taping requirements. surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 17 figure 2 C punched (paper) carrier tape dimensions user direct ion of unr ee li ng top cover t ape t center li nes o f cavity p 1 ?do po e 1 f e 2 w g a 0 b 0 cavity size, see n ote 1, tab le 7 bottom cover tape t 1 t 1 bottom cover tape [10 pitc he s cumulative tolerance on tape 0.2 mm] table 7 ? punched (paper) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 e 1 p 0 p 2 t 1 maximum g minimum r reference note 2 8 mm 1.5 +0.10 -0.0 (0.059 +0.004 -0.0) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.10 (0.004) maximum 0.75 (0.030) 25 (0.984) variable dimensions millimeters (inches) tape size pitch e2 minimum f p 1 t maximum w maximum a 0 b 0 8 mm half (2 mm) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 2.0 0.05 (0.079 0.002) 1.1 (0.098) 8.3 (0.327) note 1 8 mm single (4 mm) 4.0 0.10 (0.157 0.004) 8.3 (0.327) 1. the cavity def ned by a 0 , b 0 and t shall surround the component with suff cient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see figure 3). d) lateral movement of the component is restricted to 0.5 mm maximum (see figure 4). e) see addendum in eia standard 481 for standards relating to more precise taping requirements. 2. the tape with or without components shall pass around r without damage (see figure 6). surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 18 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. 6ijivxs)-% 7xerhevhwerh . figure 3 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t center line typical com po nent centerline figure 4 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tap e 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 5 C bending radius r r b en ding radius e mbo sse d carrier p unc hed ca rrier surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 19 figure 6 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w3 (includes flange distortion at outer edge) w2 (m ea sured at hu b) w1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n table 8 ? reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 20 figure 7 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 8 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 076_x7r_hv_auto_smd ? 11/21/2016 21 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. /)1)8mwevikmwxivihxvehiqevosj/)1)8)pigxvsrmgw'svtsvexmsr surface mount multilayer ceramic chip capacitors, (smd mlccs) high voltage x7r dielectric, 500 C 3,000 vdc (automotive grade)

▲Up To Search▲

Price & Availability of C2225C154JBRACAUTO

	To Download C2225C154JBRACAUTO Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .